Heng Long Sherman refuses to start
Posted: Sun Apr 05, 2020 3:23 pm
Hi
I took delivery of a 2.4ghz controlled Sherman a couple of days ago, with a v6.0 motherboard installed
Charged the battery up, and then powered the tank up on my work bench, testing all the functions - tracks, sound, smoke, turret movement and so on, all worked fine first time.
Today I took the tank outside to use for the first time, powered up - nothing dead as a dodo - no lights flashing nothing.
I checked the battery and it still showed a full charge, I had only used it for about ten minutes when testing it previously.
I put in a different charged battery and still nothing.
I had powered the TX on, held the padlock button down and switched the tank on. When that didn't work I tried powering TX on, then tank on then holding the padlock starter button down - still nothing
At a total loss now as to what to do, the tank has not even moved off my workbench since testing the controls a couple of days ago
thanks
I took delivery of a 2.4ghz controlled Sherman a couple of days ago, with a v6.0 motherboard installed
Charged the battery up, and then powered the tank up on my work bench, testing all the functions - tracks, sound, smoke, turret movement and so on, all worked fine first time.
Today I took the tank outside to use for the first time, powered up - nothing dead as a dodo - no lights flashing nothing.
I checked the battery and it still showed a full charge, I had only used it for about ten minutes when testing it previously.
I put in a different charged battery and still nothing.
I had powered the TX on, held the padlock button down and switched the tank on. When that didn't work I tried powering TX on, then tank on then holding the padlock starter button down - still nothing
At a total loss now as to what to do, the tank has not even moved off my workbench since testing the controls a couple of days ago
thanks