Page 1 of 2
1/35th Vintage R/C Centurion AVRE-165 kit bash
Posted: Sun Mar 22, 2020 3:52 pm
by jimbo_wa
I like these little ones, they're easier to hide from my better half!
Was lucky to find this on eBay for a reasonable price and will be adding some working suspension (with a bit of luck) and using this great resource to base it off.
Sent from my Pixel 2 using Tapatalk
Re: 1/35th Vintage R/C Centurion AVRE-165 kit bash
Posted: Thu Apr 09, 2020 8:24 pm
by jimbo_wa
The brass pinions and 6v motors have arrived, so here's a quick video of them running.
https://youtu.be/3nX2zky-ZAU
Sent from my Pixel 2 using Tapatalk
Re: 1/35th Vintage R/C Centurion AVRE-165 kit bash
Posted: Sat Apr 18, 2020 2:29 pm
by jimbo_wa
Been concentrating on the turret as there are quite a lot of bits that need moving and making.
Had a delivery from China that was really useful for making the pulleys from a bit of 5mm dowel rod.
Going to try fabricating the mantlet from the kit original and some wood filler as it's easy to use...
Sent from my Pixel 2 using Tapatalk
Re: 1/35th Vintage R/C Centurion AVRE-165 kit bash
Posted: Mon Apr 20, 2020 10:31 am
by jimbo_wa
Modified the mantlet with wood filler and plastic putty to get the desired shape, then used some brass tubing, random plastic spacers, heat shrink with one of my daughter's old pens to create the barrel.
Just stuck on with Blu-Tack at the moment, but pretty happy with the result as it's all guesstimated by eye...
Sent from my Pixel 2 using Tapatalk
Re: 1/35th Vintage R/C Centurion AVRE-165 kit bash
Posted: Mon Apr 20, 2020 3:41 pm
by jimbo_wa
And the additional driver's (?) hatch along with some details added!
Sent from my Pixel 2 using Tapatalk
Re: 1/35th Vintage R/C Centurion AVRE-165 kit bash
Posted: Mon Apr 20, 2020 10:46 pm
by Wildboar44
jimbo_wa wrote:Modified the mantlet with wood filler and plastic putty to get the desired shape, then used some brass tubing, random plastic spacers, heat shrink with one of my daughter's old pens
... Got to love the creativity in your work
Re: 1/35th Vintage R/C Centurion AVRE-165 kit bash
Posted: Tue Apr 21, 2020 2:42 pm
by jimbo_wa
Wildboar44 wrote:Got to love the creativity in your work
Thank you
Sent from my iPad using Tapatalk
Re: 1/35th Vintage R/C Centurion AVRE-165 kit bash
Posted: Thu Apr 23, 2020 2:52 pm
by jimbo_wa
Rear given a bit of extra scrap Styrene and details.
Need to work out how to make the engine grills next as the slats are at an angle rather than straight. Too small to make individually so may need to be a best effort...
Sent from my Pixel 2 using Tapatalk
Re: 1/35th Vintage R/C Centurion AVRE-165 kit bash
Posted: Fri Apr 24, 2020 1:04 pm
by jimbo_wa
Engine grills, top deck fuel cap and number plate all added.
Next job is the suspension and metal tracks...
Sent from my Pixel 2 using Tapatalk
Re: 1/35th Vintage R/C Centurion AVRE-165 kit bash
Posted: Tue May 05, 2020 4:40 pm
by jimbo_wa
Now with working suspension!
The AFV Club plastic is like cheese and rather horrid to work with. Have used brass tubing and M2 screws for the axles with copious amounts of super glue...
Sent from my Pixel 2 using Tapatalk
