RC Tank Warfare community hobby forum

I’ve just bought a second hand tamiya leopard with gbs and all the goodies. But am running it off a digital controller (flysky) got the tank to move forwards, backwards. Left, right managed to get the lights to come on and off. Also managed to get the beacon working but can’t get it to change from green to red.
The main question is has any one got the instructions for the gbs and how it works it’s all plugged in but just can’t seem how to get it to work any information would be great full

Did you get the user's manual with the tank? If not, you can download it from the Downloads section here. Or perhaps a later edition here:
https://cdn.simba-dickie-group.de/downl ... rd_2A6.pdf
Pages 13-14 are the ones dealing with switching from 'B' mode (Combat) to 'N' mode (Non-combat), with all the attendant complex lighting combinations. These are based on using the Carson reflex or 4ch Futuba/Tamiya Attack 4YWD transmitters. Configurations for other transmitters are likely to involve head-scratching, as you've discovered.

Thank you for this just need the instructions for the gun barrel stabiliser now if any one has a copy

craig1983 wrote:Thank you for this just need the instructions for the gun barrel stabiliser now if any one has a copy

It's pretty straight forward, plug it in. To activate is a left stick to corner command. On mine it was up and right but depends how you have you sticks set. You will hear a beep when its activated