Heng Long Challenger 2 - unfinished project
Posted: Sat Jan 18, 2020 6:19 pm
Decided that I'm never going to have time to finish this, so up for sale it goes!
Build thread here: viewtopic.php?f=201&t=27619
Base Heng Long chassis strengthened with aluminium and resin with custom built speaker box, metal swing arms, idlers and drive sockets.
Tamiya Leopard 2A6 tracks with rubber pads.
James Canham 3D printed wheels and Remote Weapons Station.
Metal gearboxes (zinc x2 sets one set with red can motors.
Hull upper has been highly detailed with Styrene and brass scratch-built fittings, magnets used for hull and turret attachment - was aiming for a scale build of Nomad (pictured).
New and unused parts include DKLM metal turret gear and gearbox, recoil unit and metal geared servos. Tank Modellbau Leopard 2A6 metal lights, Taigen RKL warning light and gun flash unit.
New Open Panzer tank control board with Hobbyking 45A ESC's (two ready soldered and one new in packet) and unopened DasMicro sound board.
Hobbyking 6000mAh hard case LiPo also included, it's starting to expand but is perfectly usable.
All as pictured.
This does run, but will need configuring with your own Rx/Tx combo and finishing required on the turret and LED lights.
I will post this at your own risk as it is a fragile model - it will be safely packed with most of the breaky bits that are not already fixed removed and packed separately.
£300 - Free insured postage included.





Sent from my Pixel 2 using Tapatalk
Build thread here: viewtopic.php?f=201&t=27619
Base Heng Long chassis strengthened with aluminium and resin with custom built speaker box, metal swing arms, idlers and drive sockets.
Tamiya Leopard 2A6 tracks with rubber pads.
James Canham 3D printed wheels and Remote Weapons Station.
Metal gearboxes (zinc x2 sets one set with red can motors.
Hull upper has been highly detailed with Styrene and brass scratch-built fittings, magnets used for hull and turret attachment - was aiming for a scale build of Nomad (pictured).
New and unused parts include DKLM metal turret gear and gearbox, recoil unit and metal geared servos. Tank Modellbau Leopard 2A6 metal lights, Taigen RKL warning light and gun flash unit.
New Open Panzer tank control board with Hobbyking 45A ESC's (two ready soldered and one new in packet) and unopened DasMicro sound board.
Hobbyking 6000mAh hard case LiPo also included, it's starting to expand but is perfectly usable.
All as pictured.
This does run, but will need configuring with your own Rx/Tx combo and finishing required on the turret and LED lights.
I will post this at your own risk as it is a fragile model - it will be safely packed with most of the breaky bits that are not already fixed removed and packed separately.
£300 - Free insured postage included.





Sent from my Pixel 2 using Tapatalk