Page 1 of 1
TK 22 mise service
Posted: Fri Jan 17, 2020 9:08 pm
by Jofaur86
Hello
,
Following the commissioning of the TK 22 with a Graupner ( TX ) MC 12 radio mode 2,here is the configuration i get ?
Right vertical handle ( voie 2 ) front/rear.Vertical left stick,top left corner stop/start bottom left angle,machine gun,bottom right angle fire canon,in the trop right angle,another machine gun sound,left horizon stick turret rotation ( voie 4 )? Both sleeves are back to neutral,seems strange to me
Thank you for reponse
Re: TK 22 mise service
Posted: Thu Jan 23, 2020 2:14 pm
by Jofaur86
Hello,
Having a peoblem with a TK 22/24 turntable someone have an idea ? Everything seems to work? Except the canon elevation by servo??that can't program ? And maybe another problem ? But everything in ist time.I do not understand anything about the TV remote control ( yinxiang ? Not Sony ? ) in advance thank you fir the possible help
Re: TK 22 mise service
Posted: Thu Jan 23, 2020 2:44 pm
by jarndice
I am assuming your Tank is "Airsoft" not "IR" because the CLARK TK22 needs modifying to get elevation working with "Airsoft" Tanks,
Your documentation should cover it.
Re: TK 22 mise service
Posted: Thu Jan 23, 2020 3:24 pm
by jarndice
Have you tried
www.clark-model.com/eng
There is also a U-Tube Clark TK22 set up video if you need it.
Re: TK 22 mise service
Posted: Thu Jan 23, 2020 6:25 pm
by Jofaur86
Good evening
Thank you for the answer
I do not know if " airsoft " ?because bought used with TK and canon recoil by servo ( ckark ) I read and reread the clark site and find the solution depute lany programming test
,on the handle right vertical only,have accélération,and the one the left,turret,machine gun at the top rigth,gun at the botton right,with recoil,and that's it in mode 1
I admit that begins
I no longer count the time spent
Re: TK 22 mise service
Posted: Mon Jan 27, 2020 10:33 pm
by Jofaur86
Good evening
I don't know if someone could enligthen me ? I've been struggling up aTK 22/24,I don't understand anything about the programming of the Futaba T7CP transmitter
level sittings,I have Epoint ? ,Step? Subtrim?etc.I manage to operate the TK a times but not necessarily in the order indicated on theClark website
Just want to know if possible ?the main settings ( recoil and servo élévation ) on the radio.
Thank you in advance for the help me