Page 1 of 1
Aber King Tiger anti mine screens length
Posted: Sun Dec 29, 2019 11:54 pm
by John Glover
Working on my Tamiya full option King tiger and have ended up with a set of Porsche plastic anti mine screens from the Tamiya Porsche static kit.I intend cutting these to use on the full option King Tiger.Could some kind person who has a set of Aber ones on their King tell me what the short and long side measure in Metric.THANKS FOR YOUR HELP.Regards JOHN.
Re: Aber King Tiger anti mine screens length
Posted: Mon Dec 30, 2019 11:47 pm
by ronnie42
HI The sizes are 64mm and 32mm . The voyager ones are shorter at 60 mm for the long side.
Re: Aber King Tiger anti mine screens length
Posted: Tue Dec 31, 2019 5:34 pm
by John Glover
Thank you very much Ronnie.regards John.
Re: Aber King Tiger anti mine screens length
Posted: Fri Jan 03, 2020 10:31 am
by ronnie42
Hi Are you going to put the build up? It's good to see how others go about building a tank.
Re: Aber King Tiger anti mine screens length
Posted: Sun Jan 05, 2020 8:27 pm
by John Glover
Hi Ronnie.Yep i want to put the build up.Some members may be interested.I have installed a brass frame so the deck no lounger flexes and is level with no twist through it,installed a clark elevation and recoil unit,modified the Tamiya transmissions which i did a blog on already,added bearings and SHIMS to the wheels so no axle slop and are adding a bit of additional strengthening to the middle and rear of the chassis ,Taking photos as i go.regards John.