New switch for my tank
Posted: Mon Oct 21, 2019 5:10 pm
Hi guys, I replaced the original switch with this ... it works great.
RC Tank Warfare community hobby forum
RC Tank Warfare community modelling hobby forum
https://www.rctankwarfare.co.uk/forums/
New switch for my tank
https://www.rctankwarfare.co.uk/forums/viewtopic.php?t=28645
Page 1 of 2
Re: New switch for my tank
Posted: Mon Oct 21, 2019 5:45 pm
A link would be helpful for anyone interested in buying one of these switches.
Re: New switch for my tank
Posted: Mon Oct 21, 2019 5:57 pm
Re: New switch for my tank
Posted: Mon Oct 21, 2019 6:21 pm
- 74365340_1395387287278891_5268598822514196480_n.jpg (58.81 KiB) Viewed 4561 times
Re: New switch for my tank
Posted: Mon Oct 21, 2019 6:28 pm
[quote="desmo16"]Switch Skyrc SK-600054. Taken online.
Sorry... I don't know why you see anything else.
Sorry... I don't know why you see anything else.
Re: New switch for my tank
Posted: Mon Oct 21, 2019 6:37 pm
desmo16 wrote:Hi guys, I replaced the original switch with this ... it works great.
Looks good - got a link to show where to buy it from (not your youtube clip)???
Re: New switch for my tank
Posted: Mon Oct 21, 2019 8:42 pm
The video link for the Youtube video didn't work, and your photo (when clicked to enlarge it) produced your photo, together with pics (ads) of outstanding Asian women on the Wirral 
A direct link to the best source of the switch would, as others have suggested, be very helpful.
A direct link to the best source of the switch would, as others have suggested, be very helpful.
Re: New switch for my tank
Posted: Tue Oct 22, 2019 12:50 am
Re: New switch for my tank
Posted: Tue Oct 22, 2019 2:43 pm
If you type in "SKYRC 10 amp Power Switch" on ebay you will get a list of different vendors selling this item some Freepost and very much cheaper than others but all apparently the same.
Re: New switch for my tank
Posted: Tue Oct 22, 2019 7:04 pm
- Skyrc power switch
- Skyrc power switch.jpg (16.81 KiB) Viewed 4457 times
"...SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model.
A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch.The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double sided tape. (Two kinds of bottom covers are included, user can change the bottom cover.)
The switch also features a LiPo mode, by turning this on, the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turned off if you have other safeguards in place or using NiMH/NiCad battery.
Additionally, the power switch informs you about the remaining capacity and condition of your battery pack..."