Pontoon Treadway Bridge

[Tiger6]

My latest project in the continuing battle with Wayne to prove who is the bigger 3D printing nut job:

Treadway Bridge.JPG (92.07 KiB) Viewed 568 times

The pontoons are off of Thingyverse, considerably enlarged and split into 2, because not even a CR-10S4 is big enough
I've added the loops for the ropes and replaced the original Thingyverse treadway bridge parts with my own.

I've given the first 2 a coat of Plastidip rubber spray paint - while it seems to look the part, it didn't seal the interior quite as well as I had hoped, but they still seem quite functional:

[Max-U52]

That's just amazing.

If you want to be a bigger 3D nut than Wayne you have a tough row to hoe, my friend.

[Will01Capri]

Oh dear, lol. Nice work btw

[Snipermadrid]

Hi there!
Good job the one who is doing.
If you are not already in Thingyverse, could you upload the file so you can make a copy for the enjoyment of the forum people?
Thank you from to Spain.
Anthony.

[Tiger6]

I got the original models from here (I think?) https://www.thingiverse.com/thing:2779617

[971wright]

Hi Would look good as a load on the back of one of your trucks.

regards pete

[Max-U52]

Interesting you should say that, Pete. When T6 first told me about the project he showed me this photo, so I don't think he's done with this project by a long shot.

[Snipermadrid]

I got the original models from here (I think?) https://www.thingiverse.com/thing:2779617

Hi Tiger! Thanks, one question more you´r modification the pontoons in 1/100 to 1/16 yes? Because the thingiverse is in 1/100.
Thank you best regards.

[midlife306]

Scale to 625 percent


Sent from my iPhone using Tapatalk

[Tiger6]

This ^