1/16 Scale Sandbags
Posted: Sun May 05, 2019 3:15 pm
Hello
Thought I would make a build thread and show how I went about making some scale sandbags for my Sherman build, they end up 20mm x 40mm.
Step 1
I used an old white cotton t shirt measure a rectangle 50mm x 45mm
Step 2
Using a 30cm ruler I marked out 6 at a time
and cut out your 6 rectangles
Step 3
Fold in half to make 25mm x 45mm then sew the open side and one end (the bottom) I managed this on a sewing machine after practice but can be done by hand with small stitches when finished turn inside out (I used a pencil)
Step 4
Make super strong tea I used bowl and 2 tea bags leave to soak until required colour and add salt to help fix dye
Step 5
I filled 3/4 with fine sand then used thick brown thread to tie the top then watered down PVA to the top
Then when dry apply to what ever you made them for
Darren
Thought I would make a build thread and show how I went about making some scale sandbags for my Sherman build, they end up 20mm x 40mm.
Step 1
I used an old white cotton t shirt measure a rectangle 50mm x 45mm
Step 2
Using a 30cm ruler I marked out 6 at a time
and cut out your 6 rectangles
Step 3
Fold in half to make 25mm x 45mm then sew the open side and one end (the bottom) I managed this on a sewing machine after practice but can be done by hand with small stitches when finished turn inside out (I used a pencil)
Step 4
Make super strong tea I used bowl and 2 tea bags leave to soak until required colour and add salt to help fix dye
Step 5
I filled 3/4 with fine sand then used thick brown thread to tie the top then watered down PVA to the top
Then when dry apply to what ever you made them for
Darren