Page 1 of 1
Maxing out the HL Receiver Board. Tested with Thermal Camera
Posted: Wed Feb 27, 2019 7:44 pm
by Tech-Com
This is Version 5.3 Board
Thought this might be useful to some. 30watts seems all I am comfortable with. I didn't drive it to failure, don't have the money to waste lol.
**Do not go up to 10V even if you limit the current. I killed the sound function on mine. Speaker just makes clicking sounds now. Everything else is still working.
Re: Maxing out the HL Receiver Board. Tested with Thermal Ca
Posted: Wed Feb 27, 2019 9:50 pm
by 43rdRecceReg
Neat!
You certainly earn top marks for the most recent 'off the wall' post. It's both welcome and original!
A wee bit of empirical research, can only add to the fund of know-how this Forum is amassing
Re: Maxing out the HL Receiver Board. Tested with Thermal Ca
Posted: Wed Feb 27, 2019 11:15 pm
by c.rainford73
You have certainly won the top technology badge for the forum, so neat to see what members of this forum are capable of
Re: Maxing out the HL Receiver Board. Tested with Thermal Ca
Posted: Wed Feb 27, 2019 11:39 pm
by Son of a gun-ner
Awesome. I was particularly drawn by the heat of the wires
Although you referred to the board as a receiver board, did you mean multi function unit (control board)? The Taigen ones have a cooling fan, it would be simple to fit a fan to a Heng Long board.
Re: Maxing out the HL Receiver Board. Tested with Thermal Ca
Posted: Thu Feb 28, 2019 7:24 am
by Rad_Schuhart
Very interesting. Now you have to do another video but with the smoke machine!
Re: Maxing out the HL Receiver Board. Tested with Thermal Ca
Posted: Fri Mar 01, 2019 12:36 am
by Tech-Com
Rad_Schuhart wrote:Very interesting. Now you have to do another video but with the smoke machine!
Smoke machine adds 1 to 1.2amps