RC Tank Warfare community hobby forum

Afternoon all,

I'm hoping that someone may know a supplier or point me in the direction to where I could find the parts in the pic below, they are needed for 1/16 scale and the bore diameter is to fit onto a 3mm shaft

Cheers, Lee.

Sent from my SM-G950F using Tapatalk

The one on the right is the steering knuckle from a WPL upgrade set. Any metal upgrade set for WPL should have 2 of those. If you want to buy them separately that makes matters more complicated.

A bit costly but this is the smallest set I found containing these parts.
https://ru.aliexpress.com/item/WPL-Full ... b267b9e-17

If a prop shaft extension is what you are looking for then here's your answer
https://www.ebay.co.uk/itm/Aluminum-All ... rk:39:pf:0

Alswyn

Hi Renoir,

Yes that's exactly the part, the one in the pic is from such a kit, I don't need the other items from the kit so that's why I'm trying to source them separately. The other part is a centre diff cup fitting that I'm looking for, I've found similar items on ebay but unfortunately they are to fit bigger vehicles hopefully someone may know where to find some thanks for your help

Cheers, Lee .

Hi Alwyn,

I am upgrading my Andrew's design sd.kfz 222 with the help of 'Eddyk' who is sorting the under powered motor/transmission out for me, these parts are on my list to upgrade aswell as the holes for the grub screws have elongated any other idea's would be greatly appreciated

Cheers, Lee.

Hopefully get this up and running as it should

Cheers, Lee.

Sent from my SM-G950F using Tapatalk

Model Builder 4 wrote:Hopefully get this up and running as it should

Cheers, Lee.

Sent from my SM-G950F using Tapatalk

A 222! This is the only toy missing in my Army. How I wish to have one!

I was lucky to pick this up a couple of years ago now Rad it needs upgrading to get it to run properly and with Eddyk's help hopefully it will be a good running model

Cheers, Lee.

Model Builder 4 wrote:I was lucky to pick this up a couple of years ago now Rad it needs upgrading to get it to run properly and with Eddyk's help hopefully it will be a good running model

Cheers, Lee.

Just in case, dont spend too much on it. Metal Origin says they are releasing an upgraded version "soon" (please pick that soon as a grain of salt, lol) turret rotation, barrel elevation, and overall better parts (except a huge and oversized 540 motor) are expected... So maybe you will be able to buy parts as spares.

But no doubt meanwhile you can start installing a soundcard, vibration unit, smoke and so on, in case you dont have it yet...