Heng long 2.4 ghz MFU - track recoil
Posted: Sun Jan 20, 2019 12:12 am
Hi,
I am looking at changing the old 27 mhz rx18 from my KV-1 and was (along with the IBU) thinking of changing over to the 2.4 ghz MFU as I found the motor control was pretty good (so much better than the rx-18) and I don't mind the not so brilliant sounds.
One thing that does annoy me about the board is the track recoil. I already have a ATRC (anti track recoil device) on my 27mhz setup but I understand that this doesn't work with the 2.4ghz as the recoil timing is different. Are there any other options to eliminate the track recoil or do I need to bite the bullet and get an aftermarket board ?
Cheers
Guy
I am looking at changing the old 27 mhz rx18 from my KV-1 and was (along with the IBU) thinking of changing over to the 2.4 ghz MFU as I found the motor control was pretty good (so much better than the rx-18) and I don't mind the not so brilliant sounds.
One thing that does annoy me about the board is the track recoil. I already have a ATRC (anti track recoil device) on my 27mhz setup but I understand that this doesn't work with the 2.4ghz as the recoil timing is different. Are there any other options to eliminate the track recoil or do I need to bite the bullet and get an aftermarket board ?
Cheers
Guy