Page 1 of 1

TOTM Christmas special voting is here.

Posted: Fri Dec 14, 2018 11:37 pm
by Son of a gun-ner
These are some of the 2nd place runners up through the year.

As you can see, they are all worthy of winning a TOTM, therefore I thought it would be nice to give them another chance, so here we are. Voting will end on the day before Christmas eve.

Thank you for taking the time to look at these fabulous models and voting for your favourite.

Re: TOTM Christmas voting.

Posted: Fri Dec 14, 2018 11:43 pm
by Son of a gun-ner
Panzerjaeger66 January/February Pz 4/70(V)

Here“s my Pz IV/70(V) from the tank brigade 109.

I used a HL lower hull including suspension and made a scratch upper hull and 3d printed gun mantlet (only). All tool clamps are also scratch built made of brass. All hatches are moveable and the Commanders persicope is rotating.
It was one of my first scratch build tanks, made in 2013.

Image

Image

Image

Image

Image

Image

Image

phpBB [video]


Freddy

Re: TOTM Christmas voting.

Posted: Fri Dec 14, 2018 11:47 pm
by Son of a gun-ner
maxmekker February Challenger 2

Stock Ch2 with Okmo uppgrade - tk60 - home made speaker -flysky radio

Image
Image
Image
Image
Image

Re: TOTM Christmas voting.

Posted: Sat Dec 15, 2018 12:02 am
by Son of a gun-ner
PainlessWolf March Panther G

Evenin' all. You all know my early Taigen Panther G. I did a detail Build on it a few years ago and was going to submit it in photos last month til' I broke a track running it out in the lot. Well, the track is repaired plus I did a little weathering and juiced up the Commander a bit tonight. This tank still uses Taigen Ver 1 electronics but have no fear, I was not about to drive it off of the counter top. ;o) Also, I did not load the airgun for the video ( "You'll shoot yer eye out, kid!" ) Enjoy!

Image

Image

Image

Image

Image

Image

Image

phpBB [video]

Re: TOTM Christmas voting.

Posted: Sat Dec 15, 2018 12:16 am
by Son of a gun-ner
capt midnight March Panzer IV

Here's my entry for this month. I built this PzIV for a friend over a year ago. He brought it back recently and wanted me to add the schurzen to it. We decided to go with the Thoma schurzen as you just don't see to much of it. The turret schurzen is made from sheet copper, and has opening hatches. The screens have brass frames with aluminum screen.

Re: TOTM Christmas voting.

Posted: Sat Dec 15, 2018 12:20 am
by Son of a gun-ner
Rcpanzer May. Late Tiger 1

Hello

I joined the forum in April and this is my first tank. It is a Taigen late production Panzer VI Tiger 1. It has been re-painted and all the electronics have been upgraded.

I started work on this video about four weeks ago inspired by last months competition... (so it was filmed and edited to last months rules as a stand alone video) Because it is suddenly to long for the new rules I have not added the maximum number of pictures. It is just under 4 mins long so I hope this is ok, I really don't want to cut it in half! I put allot of time and work into this video for the fun of making it and to teach myself how to edit, so please please watch my video and watch it on the actual YouTube site if possible (Bigger picture!) I would really appreciate some views and feedback!

phpBB [video]


And by popular demand: A version with the sound track removed. Engine noise only.
phpBB [video]


Image
Image
Image
Image

Open Panzer tank control board
X2 hobbyking 45A speed controllers.
Benedini sound. Class D amp running x2 3.5" 8ohm 10w speakers. Scratch built air tight boxes fixed to upper hull. Speakers running at 12V
Tarr smoke unit
added 360 turret rotation
metal lower hull, suspension, tracks, drive sprockets, gun barrel
Etched grills
Repainted inside and out.
Added splash guards around the inside of the lower hull
TGY-IS6 10ch radio using I-bus receiver

Although I am pleased with how the tank has turned out so far, it is still a work in progress.

Many thanks, and please watch my video on YouTube if you can, I would really appreciate some feedback.

Re: TOTM Christmas voting.

Posted: Sat Dec 15, 2018 12:24 am
by Son of a gun-ner
Model Builder 4 September. IDF M-51

My first roll of the dice Image it's not 100% finished yet but close enough, IDF M51 Sherman, a mix of tamiya/mato and scratchbuild.

Built by me
Painted by me
Photos by me.

Cheers, Lee. ImageImageImageImageImageImage
Image

Re: TOTM Christmas voting.

Posted: Sat Dec 15, 2018 12:41 am
by Son of a gun-ner
tomhugill September Sterling T26 tractor

Hope this one fits in the rules Carl! (Not with the number of submissions you submitted :P I've removed the second picture Mick)

Sterling t26 tractor unit with m15a trailer.

Theyre both entirely scratch built the chassis is aluminium alloy with the cab detail being styrene. Running gear uses custom transfer boxes using mechano gears with tamiya truck axles and Lego technic wheels.

Currently running in an 8x6 configuration and features the unique turntable steering from the original.

The 5th wheel operates as it should and it has powered ramps and legs for the trailer.

Built and painted by Foden

Owned, photographed and operated by me.ImageImageImageImageImageImageImage

Sent from my SM-G950F using Tapatalk

phpBB [video]

Re: TOTM Christmas voting.

Posted: Sat Dec 15, 2018 12:58 am
by Son of a gun-ner
HERMAN BIX October T34/85

"Vengeance"
T34.85 H/L with as much metal as possible outside of a hull.
Built & painted by me
Pics by me
Base by me
Figures by Von Rundstedt

Re: TOTM Christmas voting.

Posted: Sat Dec 15, 2018 9:22 am
by Son of a gun-ner
tomhugill December. Sherman m50

I'll throw a Sherman shaped hat into the ring;

Sherman m50, tamiya based with nick Aguilar resin upper, kit bashed turret based on the tamiya 105 with 3dp parts from woz and a panther barrel, lots of other scratch built and etch parts, commander was a lash up of the old S&T panzer iii crewman and a Russian from heikes modellbaugas, has a tbu and runs and ibu2. ImageImageImageImageImageImageImageImage