Page 6 of 7
Re: An interesting commission - Maultier panzerwerfer 42
Posted: Sat Jan 12, 2019 10:46 am
by AlwynTurner
Re: An interesting commission - Maultier panzerwerfer 42
Posted: Sat Jan 12, 2019 11:13 am
by midlife306
Hi Alwyn, I think that’s the sound unit that Gary raves about
Cheers
Wayne
Sent from my iPhone using Tapatalk
Re: An interesting commission - Maultier panzerwerfer 42
Posted: Sat Jan 12, 2019 11:50 am
by HERMAN BIX
Suffren-ass !!..........all this is pointing to a better than expected outcome.
Quizz ?
Will the sound module work with that speed controller ?
And, for some reason when I look at a wheeled vehicle-even if it has tracks on the back, I think steering wheel transmitter..........
(perhaps from the other life ago when I raced 1/10th off road cars.)
6 channel transmitter & receiver= no problem.
Will they all work together though ?
Re: An interesting commission - Maultier panzerwerfer 42
Posted: Sat Jan 12, 2019 11:58 am
by AlwynTurner
Hi Herman, I'm no sort of an expert on sound boards, perhaps if you message Max-u52, he seems to have done quite a bit of work on these. A 6 channel tx/rx should work fine with both the esc and the sound module.
Alwyn
Re: An interesting commission - Maultier panzerwerfer 42
Posted: Sat Jan 12, 2019 1:42 pm
by AlwynTurner
Re: An interesting commission - Maultier panzerwerfer 42
Posted: Sat Jan 12, 2019 5:33 pm
by AlwynTurner
Re: An interesting commission - Maultier panzerwerfer 42
Posted: Sat Jan 12, 2019 7:29 pm
by midlife306
Fantastic job Alwyn
Sent from my iPhone using Tapatalk
Re: An interesting commission - Maultier panzerwerfer 42
Posted: Sat Jan 12, 2019 9:26 pm
by Son of a gun-ner
Yes, superb Alwyn
Re: An interesting commission - Maultier panzerwerfer 42
Posted: Sun Jan 13, 2019 12:01 am
by HERMAN BIX
But I liked the white front suspension!!!!
So much for a simple running gear knock-up!!
Can you give me the basic dimensions please Mr Turner. It might be ok to send in a small box rather than take it apart ?
Re: An interesting commission - Maultier panzerwerfer 42
Posted: Sun Jan 13, 2019 9:47 am
by AlwynTurner
Hi Herman, the box is18cm x 14cm x 38cm, and the plan is just to remove the tracks, idlers and suspension units and leave the rest as one unit to ease reassembly whilst keeping the bits that could break or cause breakage separately wrapped in bubble wrap. I'm also sending the blueprints.
Alwyn