Re: BMP-1 IFV - Soviet army, Afghanistan 1980s - Build
Posted: Mon Mar 25, 2019 2:04 am
Hi, thank you for your encouragements
This is an extended report on the painting of the BMP-1.
The BMP-1 is applied two Tamiya enamel coats as primer to seal the plasticard and putty, with sanding after the first coat to remove any scratch and glue residue that become apparent.
The model is then applied a coat of Tamiya Olive Green acrylic.
The camo is applied with a mixture of Tamiya Desert sand and Khaki acrylics,
Black pigments are inserted into all the low corners.
Dark Steel pigments are dry brushed to all raised corners. A coat of Pigment FIxer is then applied directly on the model to seal the pigments in place, and it also gives a satin look and feel that I like.
Continuing on following post
This is an extended report on the painting of the BMP-1.
The BMP-1 is applied two Tamiya enamel coats as primer to seal the plasticard and putty, with sanding after the first coat to remove any scratch and glue residue that become apparent.
The model is then applied a coat of Tamiya Olive Green acrylic.
The camo is applied with a mixture of Tamiya Desert sand and Khaki acrylics,
Black pigments are inserted into all the low corners.
Dark Steel pigments are dry brushed to all raised corners. A coat of Pigment FIxer is then applied directly on the model to seal the pigments in place, and it also gives a satin look and feel that I like.
Continuing on following post