Page 1 of 1
Taigen V2 Control Board With sound modual
Posted: Wed Sep 26, 2018 9:28 pm
by Tank Maniac
HI GUYS, Just purchased the new taigen mfu with additional sound card and controlhe controller just keep on flashingler. I have a problem , hook all wires up cannot get board to bind with controller. the controller just keeps on flashing. the mfu fan is spinning but nothing is happening anybody got any ideas?
Re: Taigen V2 Control Board With sound modual
Posted: Wed Sep 26, 2018 10:47 pm
by outlaw_825th
Which TX are you trying to bind with?
Re: Taigen V2 Control Board With sound modual
Posted: Wed Sep 26, 2018 11:01 pm
by jarndice
The Taigen transmitter that comes with the V2 board will not bind to the V2 Board until you remove the Bind Plug on the control board as this is only there for when you are binding an aftermarket transmitter to the receiver that you have connected to the board.
And if you are trying to bind an aftermarket transmitter to the V2 board then the Bind Plug must be installed in the V2 Board making sure that a compatible receiver is connected to the V2 board.