Page 1 of 1

Heng Long Bulldog

Posted: Mon Sep 17, 2018 10:31 pm
by Challenger2Pete
Hi All, I have acquired a 2nd hand Heng Long Bulldog Tank & it has a couple of faults so if anyone can help to solve I would be most greatful

Problem 1
It doesn't fire the BB's press the button on side of transmitter & nothing?

Problem 2
the joystick operating forward & reverse push forward it goes forward, pull back still goes forward, swop the connections around inside the tank & it is the same only the tank goes backwards


Regards
Challenger 2 Pete ;D

Re: Heng Long Bulldog

Posted: Wed Sep 19, 2018 10:38 pm
by wibblywobbly
It is unlikely (but not impossible) to be the transmitter, so the only possibility is the RX18 messing up the signals somewhere along the line. Only way to tell is to swap the board out.

Re: Heng Long Bulldog

Posted: Thu Sep 20, 2018 11:09 am
by forgebear
hi you say you push the button on the right hand side and it wont fire
try push the button on the right side and slowly push the left stick up
i am guess you have the duel sound 2.4 ones
dave :wave:

Re: Heng Long Bulldog

Posted: Sun Feb 10, 2019 3:00 pm
by Vertigo
I know its old but it doesn't mean its not helpful.
Just had problem 1 - no BB fire. Mine seems to be related to the controller power. I had different batteries fitted. And they were getting hot after a few minutes. The light on the controller was flashing so i assume its low voltage. Tried a previous set of batteries and the gun worked OK.
Maybe N0 2 is just when its even worse on voltage.

Re: Heng Long Bulldog

Posted: Sun Feb 10, 2019 3:13 pm
by Son of a gun-ner
I once had a BB firing problem on my second tiger where once a BB was fired, the tank continued to go through its firing convulsions till you turned it off. It turned out it was a faulty transmitter.
I would be interested to find out what the problem was here.

P.S. I have moved this thread to general questions. This help section is for forum problems.