RC Tank Warfare community hobby forum

Hello!

What is the best option if you want a 1:16 replica 50mm KWK 39 L/60 barrel?

Ie.a cannon that looks like this:

Here. Very reputable reseller we all hold in very high regard, with competitive prizes, sells an aluminium one for 18 euros.

Gave a look at tank-modellbau.de

Lert wrote:Here. Very reputable reseller we all hold in very high regard, with competitive prizes, sells an aluminium one for 18 euros.

Thanks for the tip!

silversurfer1947 wrote:Gave a look at tank-modellbau.de

Thanks to you too.

This Barrel looks very convincing:

https://tank-modellbau.de/eng_294/Panze ... oil-System

This guy has changed 1:16 Panzer III Ausf L to an earlier model which is Panzer III Ausf J.

Note also that the gap between the tracks and the mudguard has been corrected.

There is no conversion set to that change?

assari wrote:There is no conversion set to that change?

Well, that's a third party hull. A very expensive one.

Lert wrote:

assari wrote:There is no conversion set to that change?

No, that's a scratchbuilt modification.

It is unfortunate because such work requires a lot of patience and information.

assari wrote:It is unfortunate because such work requires a lot of patience and information.

I was wrong and edited my reply. There is in fact a buyable set, but it's a replacement hull that's very expensive.

Lert wrote:

assari wrote:It is unfortunate because such work requires a lot of patience and information.

I was wrong and edited my reply. There is in fact a buyable set, but it's a replacement hull that's very expensive.

You mean that there is a 1:16 Panzer III Ausf J conversion set?