Page 1 of 1
Information Help
Posted: Sat Aug 25, 2018 2:01 am
by George
Hello
Can anyone tell me the size and type of screws used in the H.L 1/16 Walker Tank that attach the: Sprockets, Road wheels, Shocks, idlers to the hull?
Thanks
George
P.S Anyone know a N.American source for center caps for the road wheels?
Re: Information Help
Posted: Sat Aug 25, 2018 4:03 am
by PainlessWolf
Good evening,
The screws for the sprockets and Idlers are hex head I believe. The plastic road wheels used odd rivet types on my original Pershing. The Walker road wheels and the Pershing's version are the same I believe. In that case, the center caps for the Pershing wheels will fit your Walker set. ( providing yours are the plastic ones )
https://www.ebay.com/itm/HengLong-1-16- ... SwTIxZze2D
regards,
Painless
Re: Information Help
Posted: Sat Aug 25, 2018 10:09 pm
by George
Hello
Thanks PainlessWolf
Found the center caps. Now the big hunt is on for the ALL the Metric screws needed.
George
Re: Information Help
Posted: Sat Aug 25, 2018 11:11 pm
by Tiger6
The only metric screws are the M3 x 15 (or so) ones that hold the sprockets on. The rest are are bespoke self tapping screws.
Re: Information Help
Posted: Sun Aug 26, 2018 2:18 am
by George
Hello
Thank You for the information on the screws. I thought the screws that hold the road wheels onto the shocks are machine screws with a flat head.