RC Tank Warfare community hobby forum

Where do I wire the front light into. I can do the Heng Long 8 pin connector or add it as an aux light, which do you use?

Reading the Hull "8" pin Connector from the left to the right, Pin "6" For Positive and Pin "7" for negative. Pin "6" is shared with the Hull MG.

Here's the wiring diagram if it helps


Alwyn

I have the headlight wired up to the auxiliary light on my Elmod-powered T-34/76; that way I could share a common negative with the secondary machine gun and connect both LEDs at the front of the tank with only three wires. I've got it set up so that the user functions on channel 6 toggle the aux. light in one direction and the tail light in the other, so if I bump the switch up and down I can choose to have both lights on, both lights off, or one or the other on.