Page 1 of 1

Aldi airbrush compressor

Posted: Mon May 28, 2018 8:40 pm
by midlife306
Hi all, I got one of these today for £65
https://www.aldi.co.uk/workzone-airbrus ... 1211637200
It’s nice & small & comes wit an airbrush, I know it’s not the best but it’s a good starting point.
Image
Cheers
Wayne


Sent from my iPhone using Tapatalk

Re: Aldi airbrush compressor

Posted: Mon May 28, 2018 9:36 pm
by AlwynTurner
Hi Wayne, I started off with one similar to the one you bought but it wasn't powerful enough to maintain pressure. I then invested in one with an air tank, they cost about £20 more than what you paid. I hope you don't experience the same problem.

Alwyn :thumbup: :wave:

Re: Aldi airbrush compressor

Posted: Mon May 28, 2018 9:38 pm
by midlife306
Hi Alwyn, it’s a starter for 10, I could always add a small tank if need be
Cheers
Wayne


Sent from my iPhone using Tapatalk

Re: Aldi airbrush compressor

Posted: Wed Jun 06, 2018 12:27 pm
by Estnische
Its a good buy to help figure out what you really need. Mine is still going strong,

Re: Aldi airbrush compressor

Posted: Wed Jun 06, 2018 4:50 pm
by IV(AC)
This is a copy of the revell one £59.99
Image
https://www.clasohlson.com/uk/Cotech-Ai ... r183572000

Re: Aldi airbrush compressor

Posted: Wed Jun 06, 2018 8:22 pm
by wibblywobbly
They are pretty good really. The trick to maintaining air pressure is to set it at around 20psi, that way it isn't perpetually trying to re-pressurise to 60psi, which is way too high for airbrushing.

I have had two in the past ten years, and they do the job, the only thing I would do is add an additional inline moisture trap at the airbrush end, they are pretty cheap on Ebay.

Re: Aldi airbrush compressor

Posted: Thu Jun 07, 2018 9:00 am
by Estnische
Son of a gun-ner wrote:
Estnische wrote:Its a good buy to help figure out what you really need. Mine is still going strong,
Did you do any modifications to yours?

You have Aldi in Australia?
We sure do. They're really knocking the big grocery chains for six. But you have to be prepared to wean yourself off the expectations of the big stores. No bags supplied, pack yourself, no variety, brands you are not used to seeing. And the staff are grumpy and are treated poorly, with big pressure to do a lot with no help. I'd imagine its much the same business model wherever they set up.

I bought a longer hose and an Iwata brush as the Aldi brush was stuffed after a short period. The seals are crap, and the mechanisms are poor. BUT! it was precisely what I needed so I could learn what I needed in the Iwata range. Nothing wrong with the compressor, as long as you recognise it is really suited to 1/32 stuff like slot cars. If you want to paint 1/16 tanks, a larger capacity would be nice, but not compulsory. I just take it steady, give it breaks to cool down and empty the water trap regularly, as extended running will send water up the hose and into your paint. Hence Wibbly's advice.