RC Tank Warfare community hobby forum

When removing the rear sprocket on the HL PZ III I’m unsure as to what tool to use,Philips screwdriver or a small Allen wrench,really difficult to see ,can someone clarify for me.

Hi, Sorry to hear about the damage to your PZ111,

I’ve just taken the idlers off a HL pz IV, the only way I found to remove them was to split the wheel with a screwdriver to access the head of the screw. Looks like they screw on the inner half of the idler then glue the outer half over the top..
Cheers
Wayne


Sent from my iPhone using Tapatalk

Thanks Wayne,that makes sense ,Looking at it thought the screw was in awfully deep,
As of right now I’m waiting on the sellers reply to see if he will offer a replacement before delving into this little guy. In the meantime I need to find a plug conversion for the charger.
Hmmmm’ guys how does one go about deleting this duplicate post? This is twice now I’ve accidentally hit the submit button..doesn’t happen at other sites I post to!
Maybe the Mod can delete one of them.
Thx.

All of mine that I've removed have been cross point (phillips) screws. I use a jewelers screwdriver and usually have to use pliers on the shaft to get it to turn. It's a really course thread, so It's pretty hard to turn. Press in pretty hard with the screwdriver to avoid having the screw strip. If you can find a screwdriver with a small shaft, and larger handle, it'll make it easier to remove the wheel.

Hope this helps,

Bill

Duplicate post deleted. If it happens again, if you edit the duplicate post to read duplicate or words to that effect, one of us will pick up on it and remove it. I think I took the last one out anyway.