RC Tank Warfare community hobby forum

I have a tamiya KT with 1 engine and gearbox,now I want to fit a Open Panzer board.I have all the original switches and gears,so could some kindly person point me in what direction to go please.

Happy Days

Hi If you use a modern control board no need for most of the internal switches etc . Steering servo into Rx, the turret rotation motor needs the cable fitted with a 2 pin plug then a flying lead off the 8 pin lead with a 2 pin socket after finding the turret cables on 8 pin connector . The flash unit for gun if working is worth keeping . Keep the transmitter and Rx if ok .The servo is not compatible on my Elmod board , just a matter of changing over the wires in servo plug . Found that out after doing a search, different wiring non standard.

Cheers mate for the direction to start. I believe the OP board needs a 360 rotation servo unless I read it wrong,but would be interested in your way.

Happy days