RC Tank Warfare community hobby forum

Hi, Help please ,
          I have a Heng Long prop. smoke unit . It has two black and two brown wires  ? which is possitive and which is negetive ? Im also looking for a conection cable to link the Tiger1 RX13 smoke and sound board to the receiver board .

  Thanks Littletankman

Hi There take them in pairs dosnt one black one brown and wire them to the motor ouptut wires which should be red and black  wire the black to black brown to red on both motors and it should work fine .

regards pete

Hi  Pete,
 
  Thanks for that , its a great help . When you say output wires do you mean the wires on the RX13 join them there or on the motors themselfs . Sorry if sounds a daft question.

Thanks Littletankman

Hi to the motors dosnt matter if you conect to the motors them selfs or the board which ever you find the easyest .

regards pete

Hi Pete,
Thanks will do thank you .

Thanks Andy

Had problems with my unit and was sent this picture.Then thier should be a small two contact plug that connects to your cpu,do you have a rx-18? Let me know if I may be of further help.sax

H i saxon, No im curently running the old smoke and sound RX13 board but I am planning on changing to the RX18 later . Thanks for the help its very kind of you.

Andy