RC Tank Warfare community hobby forum

Good evening all just a quick question or two the first is as follows I am building my tiagen tiger kit. It has track tensioners but it’s no clear on how to properly tension the tracks and how to do it.

Second question is I have just formed out for an IBU2 full option. Does anyone know if it comes with a main power cable and switch.

Tomcoles wrote:Good evening all just a quick question or two the first is as follows I am building my tiagen tiger kit. It has track tensioners but it’s no clear on how to properly tension the tracks and how to do it.

Second question is I have just formed out for an IBU2 full option. Does anyone know if it comes with a main power cable and switch.

It’s the spring pushing it forward that creates the tension, you can reduce or increase the tension by tightening or loosening the screw that clamps the spring.


I didn’t get a main power cable with my IBU2U, I used all the wiring from the tank it was being put into
Cheers
Wayne


Sent from my iPhone using Tapatalk

Thanks buddy

MY Taigen lower has a different tensioner that is accesible by one screw per side in the bottom plate. It moves the idler arm up and down.

Have a look which one you have.

The IBU2Pro I have was delivered completely without any cables. But you can use the Taigen/HengLong Standard cables.

No powercable with the IBU

Grtz Ed