RC Tank Warfare community hobby forum

Back to the mechanics . Trying to fix the wobble on the outer wheels. Glued a piece of 11/32 tube to inner face, glued a 9/32 tube inside to support the metal tube reducing the wobble.
Will see if works , gluing the tube in pushes against the bush. Think this will make it harder for dirt to work its way into bush/bearings.

Fixing the other outer wheels and some paint .

Im sure the paintwork will be fine and dandy
I too am not looking forward to the turret numbering, over Zimmerit, a big call to get right.

Impressive engine inside. Lol

Will play it safely. Going for the 501 in France tank 332, The painting section shows one with Zimmermit, would be good if the 501 has masking sets. Wonder if i can scan and make a mask set, the other half has a fancy cutting machine / printer.

Hi Lo Needs a big motor only way to turn is by dragging the nondrive track round.

Hi Wardog Funny you should mention , found a Dewalt 10.8 impact driver less battery while out cycling last year. Don't know if its brushless or not , looked quite new. Think the Elmod boards support brushless, just need to strip the drill down and find out.

Time to tart up the jack , made handle as it was missing. May as well try to use up the Aber PE.

Hi Wardog You might have kickstarted another hop up for the KT.

Not going to butcher the jack according to the Aber instructions, will to build another. All the main bits cut and make a mould for the jacks foot.