Page 1 of 1
Help with m41a3 tank
Posted: Wed Jan 10, 2018 7:35 pm
by boodaboo
I am wondering if anyone knows were the crystals are for this tank. I have found them in the remote but not on the tank. Maybe part of the circuit board with the frequency switch? but theirs nothing that looks like a crystal.
Thanks c
Re: Help with m41a3 tank
Posted: Wed Jan 10, 2018 7:55 pm
by forgebear
try in the base where the battery goes
Re: Help with m41a3 tank
Posted: Wed Jan 10, 2018 11:39 pm
by boodaboo
nothing in battery case but the battery plug
Re: Help with m41a3 tank
Posted: Thu Jan 11, 2018 12:21 am
by Model Builder 4
Hi,
Try taking the 4 screws out from the circuit board and look underneath it, I've had them there before
Cheers, Lee.
Re: Help with m41a3 tank
Posted: Thu Jan 11, 2018 8:55 am
by forgebear
when you take off the battery cover you will see the part i have in red the Crystal should be there if there is no crystal but just 2 small pin holes then you will need to get a Crystal set like tx01 and rx01 any numbers will do if they are the same the tx will fit the transmitter and the rx in the tank