RC Tank Warfare community hobby forum

With an incredible amount of help from my friend Stian ( Maxmekker on The forum for those who would like a Clark product) I have finally setup the test for the M-3 Lee Radial engine for my Beutepanzer.

I am beyond impressed with the realism of the controls. As usual he shipped quickly and everything works exceptionally. Very easy to setup and I did it very little work. I know the video may look a bit back and forth but I wanted to capture the operation of the switches with the functions.

Flip a switch and the engine comes alive

Shift into and out of gear with a flick is cool

Cannon and dual machine guns on the exterior dials.

Stian I truly thank you

Cheers

https://youtu.be/8P81SV3AbMk

Exelent. Glad to se it up and running

maxmekker wrote:Exelent. Glad to se it up and running

I don't have your Ninja like skills yet Stian but it is incredibly easy to operate and with the same footprint as the rx-18 very compact.

Fantastic

Ludwig von wigbearer wrote:Fantastic

Thanks John. Now to see it alive in my Vandra Lee...

Carl, how is the Sbus version different ? Can you enlighten us ?

MichaelC wrote:Carl, how is the Sbus version different ? Can you enlighten us ?

for a starter you have more easy operation on the tk24 sbus vs the tk24 4ch version , same as a tk60 8ch and sbus will operate , as you will have 10chanels on the Sbus vs 4ch on the normal tk24.

1 receiver wire between tk board and receiver

So one wire between the board and the receiver, as well as additional functions like engine start, canon firing, 2nd MG, Clutch etc moved off to their own channels to top up the 8/10 channels ? Does the stick functions stays if you use the Sbus or does it get disabled ?

Thanks for the video !

MichaelC.

MichaelC wrote:So one wire between the board and the receiver, as well as additional functions like engine start, canon firing, 2nd MG, Clutch etc moved off to their own channels to top up the 8/10 channels ? Does the stick functions stays if you use the Sbus or does it get disabled ?

Thanks for the video !

MichaelC.

Not sure I understood last question

I was just wondering if you are using Sbus, can you still use the stick combination to turn on engine etc or if that gets disabled because it has been assigned to a separate channel instead of a combination of channels when it is only 4 channels.