Page 1 of 2

Chevi 30cwt LRDG

Posted: Fri Jun 12, 2009 8:49 am
by volvospeed
Hello Friends.
yesterday i start with my new project. It´s in scale 1:16 RC

I used as Basic Modell an Highway 61 Modell. The frame i was building by myself. After i cleand the Body from colour i was modified the grill, and other parts.

Image

the tires and rimes are from an toy. the tires are not really right, but i didnt found better ones.

Image

month ago, i start the same project but this one was for an friend

Image

looks good ?

Image

Image

Re: Chevi 30cwt LRDG

Posted: Fri Jun 12, 2009 8:50 am
by volvospeed
update

Now i screwed the Body to the Frame.

Also, i removed the little lamps and closed every holes.

Image

The most LRDG´s are righthanddrive, but my basicmodell was an left handdrive. So i modifid it to an right handdrive

Image



Image

Re: Chevi 30cwt LRDG

Posted: Fri Jun 12, 2009 8:51 am
by volvospeed
couple more details i was buildt last days

Image



Image



Image



Image


Image

Image

Re: Chevi 30cwt LRDG

Posted: Fri Jun 12, 2009 8:51 am
by volvospeed
Image

Image

Image

Image

Image

Image

Image

Image

Re: Chevi 30cwt LRDG

Posted: Fri Jun 12, 2009 8:53 am
by volvospeed
First i mixed the colour, than i build the ground out of woud.

After that i build in the elektrical stuff.

Image

there is not so much room for such stuff, so i put it all to the back. More weight on the rear axle, better traction. ;-)

Image

Out of wood i was building some cases

Image

Now, i can do all the details and finishing

Image

Image

Image

Re: Chevi 30cwt LRDG

Posted: Fri Jun 12, 2009 8:53 am
by volvospeed
Now, i was doing some Details. Only the two weapons are finish with colouring.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Re: Chevi 30cwt LRDG

Posted: Fri Jun 12, 2009 8:54 am
by volvospeed
One of the important things was the sun compass. I try to buildt it. It´s very small, like an thumbnail, of the little finger

Image

Image

Image

Re: Chevi 30cwt LRDG

Posted: Fri Jun 12, 2009 8:54 am
by volvospeed
neben dem Sonnenkompass hatten sie stets auch noch einen normelen Kompass mit an Board. Also mal wieder Eigenbau, Durchmesser 6mm

Image

Und fertig montiert

Image

Weiter gings mit den Farben....

Postshadow, Flächen aufgehellt, leichtes Chipping, Filtering, hier und da leichte Rostläufer. Außerdem heißt er nun Te Anau II

Image

Image

Image

Image

Image

Image

Im Innenraum kamen z.T noch Pigmente zum Einsatz.

Image

Image

Re: Chevi 30cwt LRDG

Posted: Fri Jun 12, 2009 8:56 am
by volvospeed
i finished my Chevi now. i hope You like it

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Re: Chevi 30cwt LRDG

Posted: Fri Jun 12, 2009 10:13 am
by oztruck
A truly wonderful build. I am VERY impressed with your work. Please keep up the good work.
XLNT attention to detail, and great choice of subject.