Poti instead of channel?
Posted: Mon Dec 18, 2017 4:06 pm
Hi everybody!
In my tank I use the stock taigen 2.4GHz Board and an external rc.
Unfortunately this is only 6ch.
All channels are used by the board.
I found that Ch 6 is used to adjust trackspeed of both motors.
Is there an easy way to use a potentiometer or so inside the tank to free this Channel?
In my tank I use the stock taigen 2.4GHz Board and an external rc.
Unfortunately this is only 6ch.
All channels are used by the board.
I found that Ch 6 is used to adjust trackspeed of both motors.
Is there an easy way to use a potentiometer or so inside the tank to free this Channel?