Art.Nr 052-M- Tensioning System Taigen Leopard
Posted: Sun Nov 19, 2017 11:56 am
Hello,
due to the metal lowerhull, more and more requests are coming in for a system that can be adjusted from outside the tank.
Dominique von rctank.de kindly sent me an lowerhull from Taigen.
The lowerhull makes a very good impression on me, the springs may be a little bit hard.
The system for the HL- Leopard 2A6 fits in here with small variations almost 1 to 1.
The installation is not difficult, I have used a step drill, a 2mm drill and a hand-held router, Dremel or Proxxon
The chain tensioning system will be added to the shop in the following days, and of course also can be ordered from rctank.
Best regards, Guido
due to the metal lowerhull, more and more requests are coming in for a system that can be adjusted from outside the tank.
Dominique von rctank.de kindly sent me an lowerhull from Taigen.
The lowerhull makes a very good impression on me, the springs may be a little bit hard.
The system for the HL- Leopard 2A6 fits in here with small variations almost 1 to 1.
The installation is not difficult, I have used a step drill, a 2mm drill and a hand-held router, Dremel or Proxxon
The chain tensioning system will be added to the shop in the following days, and of course also can be ordered from rctank.
Best regards, Guido