RC Tank Warfare community hobby forum

Just fitted the eco to my taigen kv. 1, now the 5 pin plug for the muzzle flash which goes into plug 2 , also has a little plug with 2 cables .Should it stay plugged so all 5 wires are in plug 2 or do i unplug that and plug the 2 wires red and black into plug 12 for the recoil. Thanks

No help going on here. So i will answer myself. Emailed rctank.de and was told no i dont have to separate the 2 pin socket from the 5 pin plug and fit in the recoil 12 possition.So thanks me.

Well if you have any other troubles, here's a whole hour of YouTube vid on how to set one up!!

Courtesy of Mr Yellewshaker Forum member..

Haha thats the video that got me asking the question to start with. He says on the video to connect the 2pin plug in socket 12, but turns out you dont.

photo

photo

photo

Ok this is how it should be connected, all working fine now

Captain Hilts wrote:Ok this is how it should be connected, all working fine now

Thanks for posting this Duncan it's a big help to all of us who are utilizing the stock recoil setup. I've learned quite a bit just researching this one.

Cheers for cross firing suggestions Carl, I'm learning new things about this hobby everyday also.