RC Tank Warfare community hobby forum

I have been looking for a 4CH transmitter that i could use with the clark TK22, i found this one, pretty affordable, i was wondering if it would work with the board... https://hobbyking.com/en_us/hobby-king- ... ode-2.html

To the best of my knowledge and belief, any 4 channel Tx and matching receiver can be used to control a Clark TK22.

hi yes it should as i have this with my ibu good little radio set-up

silversurfer1947 wrote:To the best of my knowledge and belief, any 4 channel Tx and matching receiver can be used to control a Clark TK22.

Ah okay, thanks for telling me

Just a word to anyone who is contemplating trying the TCB Open Panzer board. I did a bit of reading, and discovered that this board will only work with the transmitters/receivers listed. The reason for this is that it doesn't use the standard 4-6 channel receivers that we all use to hook up our tanks. Instead it uses the latest receivers that are used by the quadcopter hobbyists that give you multiple channels from a single plug. If you don't have one of the listed tx's then you can't use the TCB. It's not a problem if you already have one but if you don't, then you can add a new tx to the list of items that you will need to make use of the board.

Yes indeed paired this radio with lots of Clark boards. The receiver will also work with the Turnigy 9X radio from HobbyKing as well.

AshMann wrote:I have been looking for a 4CH transmitter that i could use with the clark TK22, i found this one, pretty affordable, i was wondering if it would work with the board... https://hobbyking.com/en_us/hobby-king- ... ode-2.html

Even if the video show TK60 Board it works nicely with both the tk 24 and 22. No problem. I like to use MODE1 radio, to keep the stick layout as close to the layout on Clarks webpage

Hi Ash Man nice to see you back! Glad to know your adding a Clark board to a project wich one of your tanks is getting it?

c.rainford73 wrote:Hi Ash Man nice to see you back! Glad to know your adding a Clark board to a project wich one of your tanks is getting it?

my sherman tank is getting it, the KV 1 and M1A1 abrams I have aren't compatible with the board

Sounds good Ash Man. Is your Sherman IR or airsoft? Do you have pictures of the Sherman?