Page 1 of 1
Converting the torro m16 to 2.4
Posted: Thu Mar 16, 2017 5:19 pm
by wadsworthj
Hi Guys.
Is it worth converting the torro m16 halftrack to 2.4 suggestions please,
If so which board is best. and what price, approx. plug n play would be best for me as I am not good with tech stuff.
Cheers n thanks.
John W.
Re: Converting the torro m16 to 2.4
Posted: Thu Mar 16, 2017 6:10 pm
by c.rainford73
I could be wrong but I think Elmod makes one for this application
Re: Converting the torro m16 to 2.4
Posted: Thu Mar 16, 2017 6:11 pm
by c.rainford73
Re: Converting the torro m16 to 2.4
Posted: Fri Mar 17, 2017 5:17 am
by jarndice
The "Elmod" Board is a straight swap except for a little bit of soldering to connect the speaker, You will need a new speaker,
Maplin sell a beauty for under £10 including postage.,It is just 20mm x 40mm its code number is N24KJ,
Go to "U TUBE" ,
Type in WSN/TORRO M16 and there is a very nice visual explanation for the "Elmod" fit and other tips on modding this Half track.
The "Elmod" Board changes the M16 into a very impressive bit of kit indeed,
The "Elmod" Control board including postage cost 170 Euros from ---
http://www.elmod.eu
Shaun.
Re: Converting the torro m16 to 2.4
Posted: Fri Mar 17, 2017 12:48 pm
by MichaelC
viewtopic.php?f=23&t=21211
Well worth it. The chassis is excellent and the steering is already servo control. You just need to make sure you use half track mode which all major board supports.