RC Tank Warfare community hobby forum

Hi guys, I'm putting a elmod fusion pro into a Taigen Panther, I'm having problems with the wiring of the Taigen turret to the board, I've too many wires and not enough homes for them, anyone got a wiring diagram or pic of thiers, as the set up guide gives some but not all, any help would be appreciated,Steve.

Here is the RX wiring which I think also would apply here. I also once.. to find the elevation pins just tried a pos/neg lead to test where they were
on the upper set of pins.

Oh sorry I just thought.. you probably want the Elmod side of it not the Taigen part

Vanguard wrote:Hi guys, I'm putting a elmod fusion pro into a Taigen Panther, I'm having problems with the wiring of the Taigen turret to the board, I've too many wires and not enough homes for them, anyone got a wiring diagram or pic of thiers, as the set up guide gives some but not all, any help would be appreciated,Steve.

Hi there is a fellow member of the forum Joe- (Yellowshaker) who sells and installs elmod fusion boards. He may be able to help you. He had a thread with a very nice video posted recently. He is located in the states and is very knowledgeable about all things Elmod

Not sure why you would have extra wires. I do know that it should be pretty straight forward.

Carl

What are the extra wires connected to?

All sorted now, Dominique from Rctank.De explained what the plugs and wires are for and after a bit of help from Dominique all is working fine. It's great you get the help and support from this hobby, I'm one happy lad now