My HL CHallenger 2
Posted: Wed Feb 22, 2017 4:35 pm
Well quick update on this stalled project, panic bought a turret for it as couldn't find any on Evilbay.
removed the CIP panels that seemed to have been concreted on, filled the low marks in the mould (mainly where the fixing screws are and where the right angles are as I guess HL don't do 3D moulds like dragon).
plastic card periscope lenses and sight housing doors.
Chucked the last drops of red oxide from my can at it in between rain showers.
Now for the big spend Ludwig's aluminium hull internal support and rear light modules and then DKLM suspension and tracks.
Matt
removed the CIP panels that seemed to have been concreted on, filled the low marks in the mould (mainly where the fixing screws are and where the right angles are as I guess HL don't do 3D moulds like dragon).
plastic card periscope lenses and sight housing doors.
Chucked the last drops of red oxide from my can at it in between rain showers.
Now for the big spend Ludwig's aluminium hull internal support and rear light modules and then DKLM suspension and tracks.
Matt