c.rainford73 wrote:Jussek I have a questionJussek wrote:Hi Carl, you are right, i'm using the old USM-HL, and yes, just took a look on the Beier website and this model is no longer referenced there. I didn't knew this.c.rainford73 wrote: Hi Jussek I'm assuming the sound card you are using is the usm-hl and the one that Tigrr is now using is the new version? The model you have is very nice but no longer available?
I am very impressed with the Beier sounds and am strongly considering one
Carl
I own 3 of them, the last one i bought second hand, so maybe this is the only way if you want this model.
best regards
I am rebuilding a Taigen Tiger I. It currently is running an rx18 with rc5hl from Rc tanks Australia with a 6 channel transmitter. Can I add the Beier sound card to my rx18 and control it with the rc5hl?
I was thinking of doing something different with this tanks electronics.
Thanks in advance
Carl
hi Carl,
some years ago i make this same question (talking about the rc2hl in these old days) on the beier forums and this was their reply:
me:
hallo Beier-team
i need confirmation about something you wrote in this thread:
viewtopic.php?f=17&t=416&p=1791&hilit=rc2hl#p1791
As i do not speak German, I've translated it with an on-line translator, so, before I assume the translation is correct, I prefer to ask!
my question is related to the RC2HL adapters you mentioned in the above link , were you talking about this type?
http://rctanksaustralia.com/shop/index. ... cts_id=196
The paragraph from you that I've translated is this:
"Eine Möglichkeit sind die "RC2HL"-Adapterplatinen, die es ja von verschiedenen Herstellern gibt. Diese Adapterplatinen wandeln die 1,0-2,0 ms Impulse eines normalen RC-Empfängers, in das HL-RX-18-Protokoll, welches dann wieder vom USM-HL ausgewertet werden kann."
and the chrome translation is this
"A possibility are the "RC2HL" - the adaptor boards which are from different manufacturers. These adaptor boards change 1,0-2,0 ms impulses of a normal RC receiver, in the HL-RX-18-Protocol which can be evaluated then again from USM-HL"
i need to verify if you said that the USM-HL CAN be placed between the new RC receiver (or maybe the RC2HL adapter?) and the RX18 and that it will pick up the signals, so it will work at 100% had maintain all the beier functions
Is this understanding from me correct?
Beier:
Yes, your understanding is correct. The USM-HL is placed between the RC2HL and the RX-18.
But we haven't tested the RC2HL from rctanksaustralia.com... So we can't promise for 100% that it will work.
so... i do not know! If I could have access to an rc5hl device i would test this combo, but this is not the case, i'm sorry.