A barn arises…
Re: A barn arises…
A master class in timber frame construction.
Tiger 1 Early Taigen,
Tiger 1 Mid Torro,
Tiger 1 Late Taigen,
King Tiger Taigen (P)
Jagdtiger Torro
King Tiger (H)
King Tiger Torro (H)
Tiger 1 late Torro
Panther G Taigen
Tiger 1 Mid Torro,
Tiger 1 Late Taigen,
King Tiger Taigen (P)
Jagdtiger Torro
King Tiger (H)
King Tiger Torro (H)
Tiger 1 late Torro
Panther G Taigen
Re: A barn arises…
Before I come to my locking mechanism for the doors first a little adjustment for the roof. At the roof were at all four corners a little wood strip mounted; this as lead while installing and otherwise also as lock for the roof part.
Here once a closer view…
…and here still two additional views.
Now to the locking mechanism for my doors. One door wing should receive a door lock plate and the other wing receive the locking mechanism. The locking mechanism should be operable from both sides. Normally of course only from inside but at my model also from outside…
At first were three of these wood parts for each side produced…
…and two of them with a little distance to the crossbars glued to the right door wing. The adjusted ice cream handle will later be the sliding tongue,…
…for that receive the door wing a little slit and the tongue a continuous handle.
At the other door wing were also glued one of these wooden parts.
Now I needed the lock for the left wing. These parts were made from remains of a copper sheet, first both base plates…
…and then also the holding bows for the sliding latch.
Both were soldered together, the tongue receives also a lock from a little copper rivet and finished were they…
…both door lockings.
More to that theme in the next part.
Here once a closer view…
…and here still two additional views.
Now to the locking mechanism for my doors. One door wing should receive a door lock plate and the other wing receive the locking mechanism. The locking mechanism should be operable from both sides. Normally of course only from inside but at my model also from outside…
At first were three of these wood parts for each side produced…
…and two of them with a little distance to the crossbars glued to the right door wing. The adjusted ice cream handle will later be the sliding tongue,…
…for that receive the door wing a little slit and the tongue a continuous handle.
At the other door wing were also glued one of these wooden parts.
Now I needed the lock for the left wing. These parts were made from remains of a copper sheet, first both base plates…
…and then also the holding bows for the sliding latch.
Both were soldered together, the tongue receives also a lock from a little copper rivet and finished were they…
…both door lockings.
More to that theme in the next part.
Greeting Hotte
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: A barn arises…
Incredible work The realism is uncanny in some pictures I have to take a second look to realise its a smaller scale building
Superb work
Carl
Superb work
Carl
Tanks alot....
Re: A barn arises…
Good morning Carl and many thanks. Always nice to see, that some People do like my work.
A little thing I've forgot to describe. At both sides behind the doors were between the first both ceiling beams a wood floor mounted. So it's later possible to place here a farmer or sometimes also a sniper.
A little thing I've forgot to describe. At both sides behind the doors were between the first both ceiling beams a wood floor mounted. So it's later possible to place here a farmer or sometimes also a sniper.
Greeting Hotte
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
- HERMAN BIX
- Brigadier
- Posts: 10335
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: A barn arises…
Its that real mate..............you want to watch out in case you end up with several families of refugees trying to live in it !
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
Re: A barn arises…
It goes on at the point where I’ve last time ended; at the door locking mechanism. For the door lock was a little groove made, where he then engages.
For the door lock mounting himself receive the wood a little notch. Then were both with little nails fastened. Here always mounted and still open…
…and here in closed state.
In the door area around the slits were two little stiffening’s glued, also from old ice handles. A closer view…
…and still a few from a greater distance.
Here from outside in opened state, both wings,…
…the left wing,…
…the right wing…
…and here in closed state. Each the right wing receives also a board as cover for the gap between both door wings.
So many to this part.
For the door lock mounting himself receive the wood a little notch. Then were both with little nails fastened. Here always mounted and still open…
…and here in closed state.
In the door area around the slits were two little stiffening’s glued, also from old ice handles. A closer view…
…and still a few from a greater distance.
Here from outside in opened state, both wings,…
…the left wing,…
…the right wing…
…and here in closed state. Each the right wing receives also a board as cover for the gap between both door wings.
So many to this part.
Greeting Hotte
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
Re: A barn arises…
At the roof part it goes on; the roof formwork will be applied. Used was 3 mm thick bars, which also arises from an old thick board. Began was at the roof from my annex;…
…here already finished.
Continued was at the main roof.
The boards from the roof formwork were nailed and additional glued.
Also at the counter side was the roof formwork installed.
Branch holes I‘ve ignored; my later installed roof skin will cover these holes and is also strong enough, in order to make not a hole in the roof.
The roof formwork is finished;…
…now has my roof a good stability. The weight is only a bit higher. Maybe I will weight the parts later; this is also for me interesting…
So far for today…
…here already finished.
Continued was at the main roof.
The boards from the roof formwork were nailed and additional glued.
Also at the counter side was the roof formwork installed.
Branch holes I‘ve ignored; my later installed roof skin will cover these holes and is also strong enough, in order to make not a hole in the roof.
The roof formwork is finished;…
…now has my roof a good stability. The weight is only a bit higher. Maybe I will weight the parts later; this is also for me interesting…
So far for today…
Greeting Hotte
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
- AlwynTurner
- 2nd Lieutenant
- Posts: 2597
- Joined: Thu Oct 23, 2014 10:47 am
- Location: Chapel-en-le-Frith, Derbyshire
Re: A barn arises…
This build just gets more awesome by the minute! If you were building houses in the UK to this standard you would have a long queue of customers because the stuff they are building here these days has the quality and durability of very cheap shoe boxes.
Brilliant job
Alwyn
Brilliant job
Alwyn
YOU'RE NEVER TOO OLD TO HAVE A HAPPY CHILDHOOD!
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
- Jake79
- Warrant Officer 2nd Class
- Posts: 1058
- Joined: Mon Aug 11, 2014 9:10 pm
- Location: Essex,Colchester, UK
Re: A barn arises…
Masterful work Hotte it's a pleasure to read through this build.
Jake
Jake
Tamiya: 2 King Tigers
H/L,Taigen :Initial Tiger 1, Panzer III, Kv 2, Panther G, Bulldog, Leo 2A6
H/L,Taigen :Initial Tiger 1, Panzer III, Kv 2, Panther G, Bulldog, Leo 2A6
Re: A barn arises…
Good morning Alwyn,
many thanks for your kindly words. But I think in the UK are also good modellers at home...
Everybody needs a vision...
I'm a member of a little group from tank friends in Berlin. We have since the beginning of this year a new terrain to build us there our new battleground. It's still a long way, but we are on a good way. To a nice battleground belong also nice buildings - they should become the highlights of our terrain.
And shoe boxes are not corresponding with our imaginations...
many thanks for your kindly words. But I think in the UK are also good modellers at home...
Everybody needs a vision...
I'm a member of a little group from tank friends in Berlin. We have since the beginning of this year a new terrain to build us there our new battleground. It's still a long way, but we are on a good way. To a nice battleground belong also nice buildings - they should become the highlights of our terrain.
And shoe boxes are not corresponding with our imaginations...
Greeting Hotte
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)
IG-Panzerjäger Berlin
HL Tiger I late (ElMod)
Torro Kingtiger (ElMod)
Tamiya Tiger I early (ElMod)
Tamiya Panther G (ElMod)
The thinking is allowed to all people, but many are spared. (Curt Goetz 1888-1960)