RC Tank Warfare community hobby forum

Hey, I hope that someone can help me !

What do I have :
Taigen Jagdpanther (IR version) with Rc transmitter 2.4 Ghz
New board IBU2 pro
New Spektrum DX6e with receiver AR610 (6 ch)

What's the general problem :
Can't operate the tank with my new installed IBU2 pro and Spektrum transmitter en receiver

What did I (correctly) :
Installing the IBU2 pro ref. to the manual
Bind-ing the Rc transmitter with the receiver

What does it do :
Green light on the IBU2 pro blinks all the time, also the head lamp of the tank.
That's all

What did I have done with the IBU2 pro :
Connected the 4 channels from the IBU2 pro to the receiver ref to the many manuals on this forum.
Tried it several times, no result !

Asking to you all :
- Manual step by step what I have to do to let work my 50th B-day Jagdpanther (first Rc tank) !
- Is it possible to use the standard 2.4 Ghz Taigen transmitter on the IBU2 pro ?
- Are there other opportunities then use the IBU2 pro ?

It would be heaven if someone can help me out with my issues.

Thanks

Have you tried plugging in Servos to the reciver to make sure they're working properly?

Did you follow the calibration procedure correctly

Hi
I got my DX6I to work with my Challenger and my Leopard and with AR610 as follows

AR610 CH1 =Throttle IBU2 input 1

CH2 = ALE IBU input 4

CH3 EILE IBU input 3

CH 4 Rudder IBU Input 2

hope this helps

Dave

tomhugill wrote:Have you tried plugging in Servos to the reciver to make sure they're working properly?

No, I don't have them !

Del wrote:Did you follow the calibration procedure correctly

Yes, I have done the calibration like they do in this forum, nothing helped !

DavyT5 wrote:Hi
I got my DX6I to work with my Challenger and my Leopard and with AR610 as follows

AR610 CH1 =Throttle IBU2 input 1

CH2 = ALE IBU input 4

CH3 EILE IBU input 3

CH 4 Rudder IBU Input 2

hope this helps

Dave

Hey Dave,
I've done that aswell, sorry no result !

Hey All,

Is it possible that my transmitter don't recognize my receiver ? When I've done the binding, the lights then blinged, now it stays on !

Del wrote:Did you follow the calibration procedure correctly

I've done the calibration like they do i tin this forum.

You have the PRO. So you need to connect FIVE CHANNELS. The fifth is the one who starts the engine.