RC Tank Warfare community hobby forum

hi guys witch is the best H/L Sherman to convert to the firefly & what needs to be done in the conversion apart from the barrel ? tanker 242.

My dad has just finished conversating one and the only other bits is the box on the back of the turret and the hatch and it depends of which version of the firefly you want the 1c or 5c as the mato m4a1 is best to do the 1c but you will need the turret or the 5c then it's the heng long sherman
But with themato sherman you will need a heng long turret

thanks John I might go for the H/L Sherman but witch one 76mm or 105 mm version ,tanker 242

Heng long is the 105 and the mato is 76
Also might need a mantle but it is up to you

Depends on how "correct" you want to be. I have seen guys just change the barrel and call it a Firefly right up to full conversions including lengthening the hull . The basics are: small hatch upper hull, turret hatch details, radio box, gun barrel, mantlet, rear deck, just to start with. I have a very good kit that I sell that can slap onto a HL 105 pretty easy but you do have to have moderate modeling skills.

http://www.ebay.com/itm/1-16-Sherman-Fi ... Swvg9XfPUP

There are a few guys on here who have done or are doing amazing conversions using my kit.

viewtopic.php?f=22&t=20590

viewtopic.php?f=23&t=20169

viewtopic.php?f=23&t=20164

viewtopic.php?f=23&t=20749

If it the 1c hybrid version then the only things to do is covered the hull machine gun and get the firefly turret set as the you only nend to transfer the electrics over from the turret

thanks for all the info guys I think I will go for the 1c hybrid version ,tanker 242.

If picked this one up of eBay recently it needs some work but should have it done soon it is a firefly IC hybrid