Page 1 of 1
StuH-42 Early build
Posted: Wed Nov 09, 2016 12:18 am
by Dackel
I am in need of some technical info on a StuH 42 Mato all meat build I am doing. I am in need of the measurement of the barrel length as it sticks out from the muzzle break to the start if the muzzle break. If you have the measurement from a 1/35 model, I can put my math skills to use. Thanks!
Al
Re: StuH-42 Early build
Posted: Tue Nov 15, 2016 1:03 am
by sassgrunt
I started on a 1/16 one a couple of years ago. I am using a modifies Bandai Tiger I muzzle brake on it. I'm not sure where I got my barrel length measurements from at the time, but mine is 50mm from where it exits the stock mantlet to the rear of the muzzle brake itself. If you use a plain (unthreaded) barrel, that may extend the length to closer to 60mm.
Re: StuH-42 Early build
Posted: Fri Nov 18, 2016 2:08 am
by Dackel
Thanks for the information, I do appreciate it.
Al