Page 1 of 1
Re: Common dimensions
Posted: Mon Jul 18, 2016 12:56 pm
by Raminator
Good idea for a resource, it'll definitely help for non-standard builds.
All I've got is a T-34, so hope this helps:
Code: Select all
T-34
Idler: 31.0 mm
Sprocket: 39.7 mm
Road wheel (w/tyre): 50.8 mm
(w/out tyre): 48.8 mm
Return roller: N/A
Track width: 31.5 mm
Re: Common dimensions
Posted: Mon Jul 18, 2016 1:20 pm
by HERMAN BIX
Sure, I will be in on this.
Good idea .
I will get the measuring gear out over the coming days and fill in a few for you.
Re: Common dimensions
Posted: Wed Jul 27, 2016 11:54 am
by HERMAN BIX
King Tiger ;
-track width O/A = 50mm
- idler O/D = 42mm
- roadwheel O/D = 49.5mm
- Sprocket 51.5mm
PZ IV:
- track width = 25mm
- Roadwheel O/D with tyre 28.5mm
- Idler = 43.5mm
- Sprocket = 44mm
- Return roller = 16mm
Stug III
- Track width = 25mm (winterketten 37mm)
- Roadwheel = 32.5mm
- Idler = 45mm
- Sprocket = 51mm
- Return Roller = 18mm
Tiger I
- Track width = 46mm
- Roadwheel = 49.5
- Sprocket = 48mm
- Too hard to measure in position !
All are over all diameters with tyres fitted.
Sprockets are root diameters not tooth height diameters.
Re: Common dimensions
Posted: Wed Jul 27, 2016 8:17 pm
by blimp
KV - Track 43.5mm wide . Sprocket ( minus teeth ) 48.5mm Dia. Road wheels 38mm Dia. Idler 42.5 Dia. Return roller 25mm Dia.