Page 1 of 1
Tamiya flash unit + IBU 2
Posted: Tue Jul 12, 2016 11:57 am
by EddyK
Good afternoon, gentlemen!
I have a question - is it possible to connect Tamiya flash unit to the IBU 2 Pro board?
IBU board has only two pins socket for the flash unit, but Tamiya connector has 4 pins...
Re: Tamiya flash unit + IBU 2
Posted: Tue Jul 12, 2016 12:30 pm
by Tankbear
No it cannot be connected.
It has 2 pins for the LED flash and 3 pins for a Xenon flash unit (Taigen, Heng Long).
From my experience the Taigen & Heng Long flash units are rubbish quality and fail so I tend to use high intensity white LED in my tanks.
Ian.
Re: Tamiya flash unit + IBU 2
Posted: Tue Jul 12, 2016 1:09 pm
by EddyK
Tankbear wrote:No it cannot be connected.
It has 2 pins for the LED flash and 3 pins for a Xenon flash unit (Taigen, Heng Long).
From my experience the Taigen & Heng Long flash units are rubbish quality and fail so I tend to use high intensity white LED in my tanks.
Ian.
Thanks, Ian!
I hoped, that it is possible...
Re: Tamiya flash unit + IBU 2
Posted: Tue Jul 12, 2016 3:43 pm
by EddyK
Maybe anyone have Tamiya flash wiring scheme?