RC Tank Warfare community hobby forum

Hi All,
Now this has got me baffled . I have a WSN mid Tiger 1 that I wanted to get going again. So I striped all the WSN electrics out but retained the motors. Then put in a Heng Long 2.4 Ghz system all going fine so far.BUT here's the problem I'm having switch on tank push start up so far so good. Now when I push the right stick up the tank turns left push the stick to the right and it goes forward stick to left goes backwards. Now I put the system in my firefly build lower hull and ALL works as it should do . So now I'm flummoxed to say the least. So please is there any one out there might know what's happening .Brian...

Sounds like you have a motor wire backwards on one of the gearboxes, so super spin goes forwards and backwards and forwards and reverse go let and right.

Hi Tom,
I changed the motor wires round in the plugs and put the plugs in the opposite so left to right and so on.Brian...

Hi CH,
Just had a look at that build very comprehensive that. I won't go that far . Just want to fill the gap in my Tiger 1 collection with a mid virsion. Doing this until my Firefly conversion gets here. Brian...