Page 1 of 1
motors
Posted: Thu Apr 28, 2016 6:58 pm
by Tubbykev
hi i was just wondering i got a set of gearboxes 3/1 metal ones for my walker bulldog if i put some upgraded motors in them as i was going to fit metal tracks would the upgrade in motors help
Re: motors
Posted: Thu Apr 28, 2016 7:54 pm
by tao
Motors will totally help...I love the promax 480's or 400's myself.
ACC 340 or ACC 348
http://www.maxxprod.com/mpi/mpi-10.html
Re: motors
Posted: Thu Apr 28, 2016 8:15 pm
by Tubbykev
thanks for the reply tao will have a look at them
Re: motors
Posted: Thu Apr 28, 2016 8:47 pm
by Max-U52
If you want more speed (with 3 shaft GBs the M41 is a bit faster than scale and should be fine just as it is) then get bigger motors, but the bulldog is just fine with metal tracks and stock 380 motors.
Re: motors
Posted: Thu Apr 28, 2016 9:17 pm
by Tubbykev
max it was just to make sure it will handle with the new tracks so i have just ordered 2 480s the speed is not a worry as i like them to be slowish
Re: motors
Posted: Thu Apr 28, 2016 10:01 pm
by Max-U52
The stock Bulldog can handle metal tracks with no problem with stock motors. At least mine does. I have the 3 shaft hi/low all bearing GBs in that tank, and it runs grrrrreat.