RC Tank Warfare community hobby forum

Hi fellow tankers, would anyone have a picture of the removable right angled lifting hoist arm, this was fitted at the front of the tiger 1. Thanks in anticipation.


Regards stuart

There is a good discussion of it here, including dimensions of the hole. http://www.network54.com/Forum/47207/thread/1107817835

Hi, Stuart, If you go to -
http://www.an-bri-rc-modellbau.de
They are selling them, I must warn you I have bought from them before and you should prepare yourself for a long wait when you order from them,
This is the detail you need to find it on their site and the product to order.
On the first page on the left is a vertical list headed "KATEGORIAN" scroll down to "BERGEPANZER" and click on it, scroll down a couple of rows and you will see two pictures one of the "KRAN" (crane) in situ on the front of a Tiger 1 and one picture of the item they will send you if you order,
I say if you order because it is such a simple thing that if you expand the picture you could easily make your own from the picture.
anyway it costs 4 Euros and it is--
"Panzer Zubehor 1.16 fur HENG LONG Modelle >Bergepanzer Tiger 1 KRAN Artikel No = bp14"
I hope that helps.
Shaun.

It's one of the last things I posted in my blog... see link below

I knew I had seen it somewhere recently but I had been to the German site a couple of days ago and thought that was the inspiration, when all the time it was you my hero.
Very pleased to give the plaudits to the right contributor
Shaun.

sassgrunt wrote:There is a good discussion of it here, including dimensions of the hole. http://www.network54.com/Forum/47207/thread/1107817835

Thanks for the info much appreciated

Regards stuart

jarndice wrote:Hi, Stuart, If you go to -
http://www.an-bri-rc-modellbau.de
They are selling them, I must warn you I have bought from them before and you should prepare yourself for a long wait when you order from them,
This is the detail you need to find it on their site and the product to order.
On the first page on the left is a vertical list headed "KATEGORIAN" scroll down to "BERGEPANZER" and click on it, scroll down a couple of rows and you will see two pictures one of the "KRAN" (crane) in situ on the front of a Tiger 1 and one picture of the item they will send you if you order,
I say if you order because it is such a simple thing that if you expand the picture you could easily make your own from the picture.
anyway it costs 4 Euros and it is--
"Panzer Zubehor 1.16 fur HENG LONG Modelle >Bergepanzer Tiger 1 KRAN Artikel No = bp14"
I hope that helps.
Shaun.

Thanks again for the info much appreciated


Regards stuart

tanks_for_the_memory wrote:It's one of the last things I posted in my blog... see link below

Thanks for the info much appreciated , the pics were just what i needed to give me some inspiration

Regards stuart