Deactivate barrel elevation
Posted: Mon Mar 21, 2016 8:25 am
For those that battle on flat ground at club meets, and get issues with the barrel elevation gradually rising skywards each time that they fire the IR by pushing the stick up, here is a little trick.
Most people remove the smoker from HL tanks, they then remove the switch and fill the hole.
So, remove the smoker, keep the switch. Cut the live wire from the 8 pin plug that goes to the barrel elevation motor, and solder each bare end onto the smoker switch wires. You can then switch the barrel elevation on and off whenever you like.
Most people remove the smoker from HL tanks, they then remove the switch and fill the hole.
So, remove the smoker, keep the switch. Cut the live wire from the 8 pin plug that goes to the barrel elevation motor, and solder each bare end onto the smoker switch wires. You can then switch the barrel elevation on and off whenever you like.