Page 11 of 16
Re: Tamiya 1/16 KV1
Posted: Wed May 04, 2016 9:11 am
by Ad Lav
Having a slight issue with the weathering - seems the thinners or something has reacted with the clear coat, hoping to resolve it this week but needless to say I won't be using clear coats again.
Some photos of progress, or lack of to follow later.
Re: Tamiya 1/16 KV1
Posted: Wed May 04, 2016 9:47 am
by Ad Lav
Yes, was an enamel based wash (mig) on top of the tamiya ts80 clear coat.
Slightly depressing
Re: Tamiya 1/16 KV1
Posted: Wed May 04, 2016 9:55 am
by Ad Lav
This is last night after applying the mig wash thinned with white spirits.
A couple of days before it did the same with the mig wash thinned with enamel thinners.
I cleaned most of it off last night but needs tidying up tonight before setting aside to decide what to do.
Sent from my iPhone using Tapatalk
Re: Tamiya 1/16 KV1
Posted: Wed May 04, 2016 10:59 am
by Ad Lav
It's only affected the Matt clear coat from what I can see, got the majority of its off last night before bed.
I'll have a look tonight then do a different wash.
Re: Tamiya 1/16 KV1
Posted: Wed May 04, 2016 12:41 pm
by HERMAN BIX
Ohh thats a shame..........that white cloudy effect seems to be a Tamiya clear thing.
I use a matt sealer for paintings etc, never had a problem with it.
Im sure you will recover it
Re: Tamiya 1/16 KV1
Posted: Wed May 04, 2016 8:36 pm
by Ad Lav
Saved the day - Paul suggested I use baby oil as it might clear the white cloudy mess that the flat coat caused... It only bloody worked! 99% gone.
Leaving to dry then tomorrow I'll attempt some washes/filters.
Sent from my iPhone using Tapatalk
Re: Tamiya 1/16 KV1
Posted: Wed May 04, 2016 9:44 pm
by HERMAN BIX
Baby oil !!
Who'd of thunk !
Re: Tamiya 1/16 KV1
Posted: Wed May 04, 2016 9:45 pm
by jtracks
Nice save.
Re: Tamiya 1/16 KV1
Posted: Wed May 04, 2016 9:51 pm
by Ad Lav
Relieved it's back to normal, the pin wash stayed, even some of the mig filter/wash remained. Not using a clear coat again, my heart can't take it!
Re: Tamiya 1/16 KV1
Posted: Thu May 05, 2016 9:45 pm
by Ad Lav
I believe I have saved the KV from the bin
Applied a thin black wash followed by a thin brown/sand mixed wash.
What do we think?
Sent from my iPhone using Tapatalk