FUTURE SHOCK..SAUNDERS M1A2 ABRAMS
FUTURE SHOCK..SAUNDERS M1A2 ABRAMS
Prelude :
These images are a prelude to what's in store
https://www.youtube.com/watch?v=20U8n16Hsb0
CARPE DIEM GENTS
ALPHA
Re: FUTURE SHOCK..SAUNDERS M1A2 ABRAMS
Some of the work done...simplifying the turret...took a note from Green's book of tricks...and removed the SEP ....just looks cleaner that way
No photos of the process...as they would look similar to Giant's ...basically I used a power chisel to take the SEP off
saved that for the smoker hook up
Patched the hole with scrap HL plastic and re-sculpted the box and the surface of the turret
very little powdered plastic filler used
Still need to redo the weld detail...photos of that to follow after that process is done
https://www.youtube.com/watch?v=On4upBA0rko
Carpe Diem Gents
ALPHA
No photos of the process...as they would look similar to Giant's ...basically I used a power chisel to take the SEP off
saved that for the smoker hook up
Patched the hole with scrap HL plastic and re-sculpted the box and the surface of the turret
very little powdered plastic filler used
Still need to redo the weld detail...photos of that to follow after that process is done
https://www.youtube.com/watch?v=On4upBA0rko
Carpe Diem Gents
ALPHA
- jackalope
- Lieutenant
- Posts: 3885
- Joined: Fri Jun 20, 2014 7:42 pm
- Location: Communist State of Maryland, United States.
Re: FUTURE SHOCK..SAUNDERS M1A2 ABRAMS
Oh that's gonna be cool!
Re: FUTURE SHOCK..SAUNDERS M1A2 ABRAMS
Keep your fingers crossed for me Jack ...Paint suggestions welcome...no Pink on this one though it's a SAUNDERS Tankjackalope wrote:Oh that's gonna be cool!
So the choices would be Dessert tan (not sure about this as it might resemble a Kuromorimine vehicle) ...solid green...or NG green camo
ALPHA
Re: FUTURE SHOCK..SAUNDERS M1A2 ABRAMS
Photos for reference
thats it for now lol
ALPHA
thats it for now lol
ALPHA
Re: FUTURE SHOCK..SAUNDERS M1A2 ABRAMS
Go nato green. Don’t see many which aren’t dessert.
www.mad-tanks.weebly.com
www.rctankelectronics.com
www.rc-truck.weebly.com
www.rc-boat.weebly.com
www.rctankelectronics.com
www.rc-truck.weebly.com
www.rc-boat.weebly.com
- jackalope
- Lieutenant
- Posts: 3885
- Joined: Fri Jun 20, 2014 7:42 pm
- Location: Communist State of Maryland, United States.
Re: FUTURE SHOCK..SAUNDERS M1A2 ABRAMS
NG green camo. It fits the school better and is a rarer scheme.
Re: FUTURE SHOCK..SAUNDERS M1A2 ABRAMS
Got some work done...
this was previous....the smoker diffuser/baffle an old design of mine that I've used in all of my remake tanks
recycled the SEP unit...it fit over the two holes...which where joined by removing the plastic between them ...leaving a large rectangle...allowing a free flow wide spread smoke pattern ....similar to Green's set up ..but different ...everything is internal...no external mods needed
After some research...found there isn't a weld in front of the SEP....but a conduit covered by angle iron...so I simulated that
Let's say I went to town here lol...cleared all the molded on grill work...Those who own this HL...if you notice under the deck ....there are molded dots where the holes for the pre-filter baffling are located....HL thought ahead on this...I'm guessing they knew modellers would want a nicer effect after working on the tank
I'm liking this tank so far...there's some work to be done...but not bad in comparison to what I've been doing lately ...progress is pretty fast...think all the little handles will slow me down a tad though
Kei can't wait
https://www.youtube.com/watch?v=pCOrfMKD8tc
Carpe Diem Gents
ALPHA
this was previous....the smoker diffuser/baffle an old design of mine that I've used in all of my remake tanks
recycled the SEP unit...it fit over the two holes...which where joined by removing the plastic between them ...leaving a large rectangle...allowing a free flow wide spread smoke pattern ....similar to Green's set up ..but different ...everything is internal...no external mods needed
After some research...found there isn't a weld in front of the SEP....but a conduit covered by angle iron...so I simulated that
Let's say I went to town here lol...cleared all the molded on grill work...Those who own this HL...if you notice under the deck ....there are molded dots where the holes for the pre-filter baffling are located....HL thought ahead on this...I'm guessing they knew modellers would want a nicer effect after working on the tank
I'm liking this tank so far...there's some work to be done...but not bad in comparison to what I've been doing lately ...progress is pretty fast...think all the little handles will slow me down a tad though
Kei can't wait
https://www.youtube.com/watch?v=pCOrfMKD8tc
Carpe Diem Gents
ALPHA
Re: FUTURE SHOCK..SAUNDERS M1A2 ABRAMS
That's two for green (My green not NATO)Tankbear wrote:Go nato green. Don’t see many which aren’t dessert.
That's two for NG camojackalope wrote:NG green camo. It fits the school better and is a rarer scheme.
Thanks Gents
ALPHA
Last edited by ALPHA on Fri Aug 07, 2015 1:08 am, edited 1 time in total.
Re: FUTURE SHOCK..SAUNDERS M1A2 ABRAMS
More research :
That will do for now.................
At Ease
ALPHA
That will do for now.................
At Ease
ALPHA