Page 1 of 1
help, this is the problem my tiger has................
Posted: Mon Mar 30, 2009 9:20 am
by boxerdog
it has snapped one of the motor stand offs, cracked the outer gear casing, so if anyone has a dead tiger for about £20 i may well need it, or any ideas welcome as to how i can repair it.
Re: help, this is the problem my tiger has................
Posted: Mon Mar 30, 2009 9:41 am
by 971wright
Hi Dont worry about the outercase you can buy metal ones or someone will have some spare plastic ones ,the broken standoff is repairable cut a piece of metal tube about 5mm bore the same length as the standoff then place over standoff with 3mm drill with gearbox in position drill though the gearbox mounting holes all the way through and fit a 3 mm screw from the underside and a nut on the inside a bit of thread lock and its done .
regards pete
Re: help, this is the problem my tiger has................
Posted: Mon Mar 30, 2009 11:06 am
by afv
Howdoo Boxerdog,
same happened to me, did what 971wright described but used a 3mm button head screw, it's rounded at the bottom so less chance of snagging
regards Jack.